Rhino Concrete Services logoRhino ConcreteServices (562) 824-2092

Equipment Pads in Long Beach and Nearby Cities

We pour machine pads inside shops and other buildings, like the pad under a CNC machine or a lathe, in Long Beach and the nearby cities listed on our site. We also pour outdoor pads for a generator, an AC unit, pool equipment, a tank, or a compressor. The pad is built to the equipment maker's or the engineer's specs when there are specs, and we pour for homeowners and for general contractors. We're based at 1553 E Burnett St in Signal Hill.

We pour the concrete pad. Setting, wiring, and hooking up the equipment is done by others.

Since 1998.

Call (562) 824-2092Text us a photoRequest a quote

Existing shop floor and covered machines beside a plastic-sheeted work area at a CNC lathe machine pad job in Santa Ana, by Rhino Concrete
This photo is from a CNC lathe machine pad job in Santa Ana. It shows demo and base prep, not a finished pad.

What we pour

An equipment pad is the concrete under a machine. Inside a shop or other building, that can mean breaking out part of the old floor slab and pouring a new pad for a CNC machine, a lathe, or other heavy machinery. Outside, it's the pad under a generator, an AC condenser or heat pump, pool equipment, a tank, a compressor, or another machine. We size the pad to the unit you actually have. The pad is built to the equipment maker's or the engineer's specs when there are specs. We pour the concrete pad. Setting, wiring, and hooking up the equipment is done by others.

For equipment and machine pads on Long Beach lots, see our Long Beach equipment pads page. That page is for pads on Long Beach homes and commercial lots. This page is the main equipment-pad service page for Long Beach and nearby cities.

Recent pad work

These photos are from a CNC lathe machine pad job in Santa Ana. They show demo and base prep, not a finished pad.

How we pour a pad

Bring the unit's install guide or the engineer's drawings if you have them. We look at those specs, the access for our equipment, and the grade, then we compact a base, set forms, place rebar, and pour the pad. If the unit cannot sit in standing water, we set that pitch as part of the pour, not as a standalone drainage job.

Permit rules vary by city and change over time, so check with your city.

Official links

We pour equipment pads for jobs in Long Beach and the nearby cities listed on our site. Call or text (562) 824-2092 for an estimate.

Frequently asked questions

What is an equipment pad, and what do you pour?

An equipment pad is the concrete under a machine, like a CNC machine or a lathe inside a building. We also pour pads for a generator, an AC unit, pool equipment, a tank, or a compressor. We pour that pad for homeowners and for general contractors. We pour the concrete pad. Setting, wiring, and hooking up the equipment is done by others.

Do you pour an equipment pad in Long Beach?

Yes. We pour equipment pads in Long Beach and nearby cities. For pads on Long Beach homes and commercial lots, see our Long Beach equipment pads page. We're based at 1553 E Burnett St in Signal Hill. Call or text (562) 824-2092 for an estimate.

Do you build the pad to the equipment specs?

Yes. The pad is built to the equipment maker's or the engineer's specs when there are specs. Send the guide or the drawings with the photos so the pour matches what the unit needs.

Do you work with homeowners and general contractors?

Yes. Homeowners and general contractors both hire us for an equipment pad. Tell us about the unit, the access, and the specs when you call or text (562) 824-2092.

Will I need a permit?

Permit rules vary by city and change over time, so check with your city.

Request a rough quote

Text us the length and width in feet and a few photos showing access for our equipment, and we can give you a rough quote over the phone. A rough quote is an estimate, not a final price.

Job type
A simple rectangle, 20 feet long by 12 feet wide A rectangle labeled length 20 feet along the long side and width 12 feet along the short side, with a car silhouette for scale. Write it down as 20 feet by 12 feet. You don't need to multiply. length 20 feet width 12 feet Write it down as 20 feet by 12 feet. You don't need to multiply.
Write it down as 20 feet by 12 feet. You don't need to multiply.

Have photos? Text them to (562) 824-2092.

Add details (optional)

Optional, but it helps us give you a more accurate quote.

How to measure for a rough quote

You don't need to multiply. Just give us the length and width, in feet, like "20 feet by 12 feet." If you also have inches, write those out, like "20 feet 6 inches."

Measure in feet. Use a tape measure if you have one. Take a photo of the tape.

If you don't have a tape, count your steps along each side and send us the step count. Don't convert it.

Odd shapes: give each section's length and width, or send a photo of a sketch with the numbers on it.

Curves: give the longest and widest measurements, plus a photo or a sketch.

An L-shape split into two rectangles, section A and section B An L-shape split by a dashed line into section A and section B. Section A is labeled length 16 feet and width 10 feet. Section B is labeled length 8 feet and width 10 feet. Give each section's length and width, or send a photo of a sketch with the numbers on it. section A length 16 feet width 10 feet section B length 8 feet width 10 feet Give each section's length and width, or send a photo of a sketch with the numbers on it. You don't need to multiply.
Give each section's length and width, or send a photo of a sketch with the numbers on it.
Size of the area

For an L-shape or other odd shape, add a section for each rectangle. You don't need to multiply.

New work or replacing old concrete?
Is the ground sloped or flat?
What will park or sit on it?

Photos

Photos that help:

  • A wide shot of the whole area
  • The street or driveway entrance
  • Gate or side-yard width, with a tape measure in the frame
  • The path from the street to the pour area
  • Where the truck would park
  • Anything overhead or low (wires, tree branches, eaves)

Baverstock Construction Corp, Licensed C-8, CSLB #795033

or just text us your numbers and photos

CallText a photoRequest a quote